Specifications

Removal and replacement procedures 29
4.
Remove the mezzanine card.
CAUTION: To prevent damage to the server blade, apply pressure over the mezzanine
connector when installing the mezzanine card. Do not apply pressure to the edges of the card.
To replace the component, reverse the removal procedure.
HP Smart Array P400i Controller battery pack
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove the battery pack.
5. Disconnect the battery cable from the battery pack.