Specifications

Removal and replacement procedures 28
FBDIMM
CAUTION: Use only HP FBDIMMs. FBDIMMs from other sources may adversely affect data
integrity.
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove the FBDIMM baffle ("FBDIMM baffles" on page 26).
5. Remove the FBDIMM.
To replace the component, reverse the removal procedure.
Mezzanine card
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see the system board components (on page 49) .
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).