Specifications

Removal and replacement procedures 26
FBDIMM baffles
CAUTION: To avoid damage to the server blade and the enclosure, install all FBDIMM baffles
in the proper location after adding or replacing FBDIMMs. FBDIMM baffles that are missing or
installed incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove the FBDIMM baffle:
o FBDIMM baffle covering FBDIMM slots 1-8
o FBDIMM baffle covering FBDIMM slots 9-16
To replace the component, reverse the removal procedure.