User guide

Troubleshooting iLO 2 191
Event log display Event log explanation
Virtual Floppy in use by: User Displays when a user begins using a Virtual Floppy.
Remote Console login: User Displays when a user logs on a Remote Console
session.
Remote Console Closed Displays when a Remote Console session is closed.
Failed Console login - IP Address: IP address Displays a failed console login and IP address.
Added User: User Displays when a local user is added.
User Deleted by: User Displays when a local user is deleted.
Modified User: User Displays when a local user is modified.
Browser login: User Displays when a valid user logs on to iLO 2 using
an Internet browser.
Browser logout: User Displays when a valid user logs off iLO 2 using an
Internet browser.
Failed Browser login – IP Address: IP address Displays when a browser login attempt fails.
Remote Console login: User Displays when an authorized user logs on using the
Remote Console port.
Remote Console Closed Displays when an authorized Remote Console user
is logged out or when the Remote Console port is
closed following a failed login attempt.
Failed Console login – IP Address: IP address Displays when an unauthorized user has
failed three login attempts using the
Remote Console port.
Added User: User Displays when a new entry is made to the
authorized user list.
User Deleted by: User Displays when an entry is removed from the
authorized user list. The User section displays the
user who requested the removal.
Event Log Cleared: User Displays when the user clears the Event Log.
Power Cycle (Reset): User Displays when the power has been reset.
Virtual Power Event: User Displays when the Virtual Power Button is used.
Security Override Switch Setting is On Displays when the system is booted with the
Security Override Switch set to On.
Security Override Switch Setting
Changed to Off
Displays when the system is booted with the
Security Override Switch changed from On to Off.
On-board clock set; was previously
[NOT SET]"
Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there was
not a time setting previously.
Logs full SNMP trap alert failed for: IP address Displays when the logs are full and the SNMP trap
alert failed for a specified IP address.
Security disabled SNMP trap alert failed for: IP
address
Displays when the security has been disabled and
the SNMP trap alert failed for a specified IP
address.
Security enabled SNMP trap alert failed for: IP
address
Displays when the security has been enabled and
the SNMP trap alert failed for a specified IP
address.