User guide
Troubleshooting iLO 2 190
Event log display Event log explanation
iLO 2 Self Test Error: # Displays when iLO 2 has failed an internal test. The
probable cause is that a critical component has
failed. Further use of iLO 2 on this server is not
recommended.
iLO 2 reset Displays when iLO 2 is reset.
On-board clock set; was #:#:#:#:#:# Displays when the onboard clock is set.
Server logged critical error(s) Displays when the server logs critical errors.
Event log cleared by: User Displays when a user clears the event log.
iLO 2 reset to factory defaults Displays when iLO 2 is reset to the default settings.
iLO 2 ROM upgrade to # Displays when the ROM has been upgraded.
iLO 2 reset for ROM upgrade Displays when iLO 2 is reset for the ROM upgrade.
iLO 2 reset by user diagnostics Displays when iLO 2 is reset by user diagnostics.
Power restored to iLO 2 Displays when the power is restored to iLO 2.
iLO 2 reset by watchdog Displays when an error has occurred in iLO 2 and
iLO 2 has reset itself. If this problem persists, call
customer support.
iLO 2 reset by host Displays when the server resets iLO 2.
Recoverable iLO 2 error, code # Displays when a non-critical error has occurred in
iLO 2 and iLO 2 has reset itself. If this problem
persists, call customer support.
SNMP trap delivery failure: IP address Displays when the SMNP trap does not connect to
the specified IP address.
Test SNMP trap alert failed for: IP address Displays when the SNMP trap does not connect to
the specified IP address.
Power outage SNMP trap alert failed for: IP
address
Displays when the SNMP trap does not connect to
the specified IP address.
Server reset SNMP trap alert failed for: IP
address
Displays when the SNMP trap does not connect to
the specified IP address.
Illegal login SNMP trap alert failed for: IP
address
Displays when the SNMP trap does not connect to
the specified IP address.
Diagnostic error SNMP trap alert failed for: IP
address
Displays when the SNMP trap does not connect to
the specified IP address.
Host generated SNMP trap alert failed for: IP
address
Displays when the SNMP trap does not connect to
the specified IP address.
Network resource shortage SNMP trap alert
failed for: IP address
Displays when the SNMP trap does not connect to
the specified IP address.
iLO 2 network link up Displays when the network is connected to iLO 2.
iLO 2 network link down Displays when the network is not connected to iLO
2.
iLO 2 Firmware upgrade started by: User Displays when a user starts a firmware upgrade.
Host server reset by: User Displays when a user resets the host server.
Host server powered OFF by: User Displays when a user powers off a host server.
Host server powered ON by: User Displays when a user powers on a host server.