User guide

Directory services 140
4.
Click Apply Settings.
5. Click Test Settings.
Schema-free scripted setup
To setup the schema-free directories option using RIBCL XML scripting:
1. Download and review the scripting and command line resource guide.
2. Write a script that configures iLO 2 for schema-free directories support and run it. The following
script can be used as a template.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="admin" PASSWORD="password">
<DIR_INFO MODE = "write">
<MOD_DIR_CONFIG>
<DIR_ENABLE_GRP_ACCT value = "yes"/>
<DIR_GRPACCT1_NAME value
="CN=Administrators,CN=Builtin,DC=HP,DC=com "/>
<DIR_GRPACCT1_PRIV value = "1"/>
</MOD_DIR_CONFIG>
</DIR_INFO>
</LOGIN>
</RIBCL>
Schema-free HPLOMIG-based setup
HPLOMIG is the easiest way to set up a large number of LOM processors for directories. To use
HPLOMIG, download the HPQLOMIG utility and additional documentation from the HP website
(http://www.hp.com/servers/lights-out
). HP recommends using HPLOMIG when configuring many LOM
processors for directories. For more information on using HPLOMIG, see "HPQLOMIG directory migration
utility (on page 173)."
Schema-free setup options
Setup options are the same regardless of which method (browser, HPQLOMIG, or script) you use to
configure the directory.
After enabling directories and selecting the Schema-free option, you have the following options.
Minimum Login Flexibility
• Enter the directory server’s DNS name or IP address and LDAP port. Typically, the LDAP port for an
SSL connection is 636.
• Enter the distinguished name for at least one group. This group can be a security group (for
example: "CN=Administrators,CN=Builtin,DC=HP,DC=com") or any other group as long as the
intended iLO 2 users are members of the group.
With a minimum configuration, you can log into iLO 2 using your full distinguished name and
password. You must be a member of a group that iLO 2 recognizes.
Better Login Flexibility
• In addition to the minimum settings, enter at least one directory user context.