Specifications
Table Of Contents
- HP ProLiant BL460c Generation 5 Server Blade Maintenance and Service Guide
- Notice
- Contents
- Customer self repair
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Safety considerations
- Server blade preparation
- Access panel
- Hard drive blank
- Hard drive
- FBDIMM
- Hard drive backplane
- Hard drive backplane retainer
- Front panel/hard drive cage assembly
- Mezzanine card
- HP Smart Array E200i Controller cache module
- HP Smart Array E200i Controller battery pack
- Server blade handle
- Release button
- Heatsink
- Processor
- System board
- System battery
- Diagnostic tools
- Component identification
- Specifications
- Acronyms and abbreviations
- Index
Removal and replacement procedures 42
6.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
7. Install the heatsink.
8. Install the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on page
30).
9. Install the hard drive backplane ("Hard drive backplane" on page 28).
10. Install the hard drive blanks ("Hard drive blank" on page 25).
11. Install the hard drives ("Hard drive" on page 25).
12. Install the access panel ("Access panel" on page 24).
13. Install the server blade.