User guide

Hardware options installation 35
11.
Remove the thermal interface protective cover from the heatsink.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
12. Install the heatsink.
CAUTION: Route the cache module battery cables so that they do not become pinched when
the server B assembly is installed.
13. Install the server B assembly ("Install server B assembly" on page 15).
14. Install the server blade ("Installing a server blade" on page 19).