User guide

Hardware options installation 30
20.
Install the cable shield.
21. Install the server A USB key, if removed.
CAUTION: Route the cache module battery cables so that they do not become pinched when
the server B assembly is installed.
22. Install the server B assembly ("Install server B assembly" on page 15).
23. Install the server blade ("Installing a server blade" on page 19).
Processor option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
• Do not touch the bottom of the processor, especially the contact area.
CAUTION: To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION: To prevent possible server blade overheating, always populate processor socket 2
with a processor and a heatsink or a processor socket cover and a heatsink blank.