Specifications

Removal and replacement procedures 42
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: To prevent possible server malfunction, route the BBWC battery cable so that it
does not become pinched or damaged when the heatsink is installed.
8. If removed, install the BBWC cable.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
9. Install the heatsink.
10. Install all components removed from the failed system board.