Installation guide

Removal and Replacement Procedures
8. Remove the plastic fan baffle (1), and disconnect the SCSI backplane cable from the
system board (2).
CAUTION:
For local I/O cable server models, be sure the LED board cable is not
disengaged when removing the fan baffle. When reinstalling the fan baffle, be sure
cable is fully seated.
NOTE: The fan baffle is most easily removed at a 45˚ angle. Depending on the server model, the fan
baffle may be attached to the system board with a small plastic clip.
Figure 2-22: Disconnecting the SCSI backplane cable
Reverse steps 1 through 8 to replace the SCSI backplane.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide 2-23