User's Manual

HP Designjet T Series — Service Manual 6-241
Removal and Installation - Right Starwheel Lifter (T1100/T1100ps/T610)
9. Rotate the Right Starwheel Lifter sufficiently
to disengage the right attachment lug.
10. Tilt the Right Starwheel Lifter sufficiently to
disengage the left attachment lug.
11. Remove the Right Starwheel Lifter from the
printer.
Do NOT remove the spring from
the Right Starwheel Lifter, because
it is difficult to reattach.
When you finish installing or replacing this component, you must perform the
necessary Service Calibrations. To find which calibrations you must perform,
see Service Calibration Guide to Removal and Installation
on page 6-5.