User's Manual

HP Designjet T Series — Service Manual 6-99
Removal and Installation - Encoder Strip, spring and attachment nut (T1120/T1120ps)
Encoder Strip, spring and attachment nut (T1120/T1120ps)
Removal
1. Remove the Right Cover on page 6-27.
2. Remove the
Left Cover on page 6-30.
3. Remove the T-15 screw that secures
Encoder Strip to the printer.
4. Grip the Encoder Strip and move it
towards the left to take off the tension until
you have completed the next step.
5. Unclip the Encoder Strip from it’s
attachment lugs.
Switch off the printer and remove the power cable.