User's Manual

HP Designjet T Series — Service Manual 6-97

Removal and Installation - Encoder Strip, spring and attachment nut (T1100/T1100ps/

T610)

6. Loosen the T-10 uncapping screw

sufficiently so you can manually move the

Carriage Assembly in step

If you are uncapping a 44 inch

printer, you will need to use either

a very long or very short

screwdriver to loosen the

uncapping screw. In this way, you

can loosen the screw and pass the

rewinder motor.

7. Push the Carriage Assembly into the print

path.

8. Unclip the Encoder Strip tensioner from the

right hand end.

44 inch T1100 printer shown (with Rewinder)