User's Manual

HP Designjet T Series — Service Manual 6-75
Removal and Installation - Pen to Paper Space (PPS) Solenoid (T1100/T1100ps/T610)
Pen to Paper Space (PPS) Solenoid (T1100/T1100ps/T610)
Removal
1. Remove the Right Cover on page 6-27.
2. Unroute the Pen to Paper Space (PPS)
Solenoid cable from the cable clamp.
3. Disconnect the Pen to Paper Space (PPS)
Solenoid connector from the PrintMech
PCA.
4. Remove two T-15 screws that secure the
Pen to Paper Space (PPS) Solenoid to the
printer.
Switch off the printer and remove the power cable.