User's Manual

HP Designjet T Series — Service Manual 6-71
Removal and Installation - Aerosol Fan Assembly (T1100, T1100ps, T610 ONLY)
Aerosol Fan Assembly (T1100, T1100ps, T610 ONLY)
Removal
1. Remove the Right Cover on page 6-27.
2. Disconnect the Aerosol Fan Assembly in-
line connector.
3. Remove the four T-15 screws that secure the
Aerosol Fan Assembly to the Service
Station.
The four access holes in the
Aerosol Fan Assembly housing
are the same size as the
attachment screw diameter so
you will need a normal Torx
Screwdriver, not a multi-tool,
to remove the screws.
Switch off the printer and remove the power cable.
The Aerosol Fan Assembly does not exist for:
 T1120/T1120ps printers.
 T1100, T1100ps, T610 printers manufactured after mid-February, 2008
This procedure is only for T1100, T1100ps, and T610 printers that include an
Aerosol Fan Assembly.