User's Manual

HP Designjet T Series — Service Manual 6-59
Removal and Installation - Ink Supply Tubes Support Rail (T1120/T1120ps)
Ink Supply Tubes Support Rail (T1120/T1120ps)
Removal
1. Remove the Right Cover on page 6-27.
2. Remove the
Left Cover on page 6-30.
3. Remove the
Front Panel on page 6-47.
4. Remove the
Top Cover on page 6-50.
5. Remove the
Window Position Sensor on
page 6-53.
6. Remove two T-15 screws that secure the Ink
Supply Tubes Support Rail to the right Top
Cover Support.
7. Carefully slide the Ink Supply Tubes
Support Rail to the left until the right end is
clear of the right Top Cover Support.
Switch off the printer and remove the power cable.