User's Manual

HP Designjet T Series — Service Manual 3-45
Service Tests (Diagnostics)
2 The Front Panel will show the 8. Service Station submenu.
3 In the 8. Service Station submenu, scroll to Primer Motor and press
OK to start the test.
4 The Primer Motor test starts and the front Panel displays the following
mes
sages:
 Starting Horsburgh and Mips.
 Starting Nvm.
 Getting Part Number.
 Starting Service Station.
 Starting Scan Axis.
 Moving SVS out of Sax.
 Homing Scan Axis.
 Moving Carriage out of SVS.
 Homing Service Station.
 Starting ServicingServices.
 Capping Service Station.
 Uncapping Service Station.
 Starting Primer Motor
 Starting AcumenSupplies
 Starting FluidManager
 Starting Primer
 Preparing SVS
 Reading Homing Sensor
 Zero Sensor initial value: 0.
 Step 1: current zeroSensor value: 0.
 OK: It has been detected a change in zero sensor.
 Homing Primer Motor
 Moving Primer Motor and getting traces
 Moving Primer Motor to home position
 Capping service station
5 The Front Panel shows the test complete display for a few seconds.