User's Manual

Service Tests and Utilities
3-40 HP Designjet T Series — Service Manual
8 The Front Panel prompts you to shutdown the printer to complete the test.
9 Press any key to shutdown the printer.
Check Leakage
1 In
the Diagnostics menu, scroll to 7. I
DS and press OK.
2 The Front Panel will show the 7. IDS submenu.
3 In the IDS submenu, scroll to Check Leakage and press OK to start the
test.
4 The Ink Delivery System test starts and the front Panel prompts you to remove
all the Ink Su
pplies.
5 The Check Leakage test starts and the Front Panel displays the following
messages:
 Starting Horsburgh and Mips
 Starting Nvm
 Starting Tubes
 Reading Tubes status
 Getting Part Number
 Starting ISS Motors
 Starting DDI Sensors
 Moving Bongos down