User's Manual

Once you have completed the Rewinder diagnostic test, you
must perform a Paper Advance Calibration. Paper Advance
Calibration on page 4-6.
Service Tests and Utilities
3-36 HP Designjet T Series — Service Manual
7. Ink Delivery System (IDS)
The complete Ink Delivery System test consists of individual tests for the
different components related to this subsystem. These tests are:
 Ink Delivery System
 Check Ink Supplies
 Check Leakage
Diagnostic tests also need to be performed after removing or replacing
certain pr
inter components. If you have removed or replaced printer
components, check the
Service Calibration Guide to Removal and
Installation on page 6-5 to see which tests and calibrations you need to
perform.
Ink Delivery System
1 In
the Diagnostics menu, scroll to 7. I
DS and press OK.
2 The Front Panel will show the 7. IDS submenu.
3 In the IDS submenu, scroll to Ink Delivery System and press OK to start
the test.
4 The Ink Delivery System test starts and the front Panel prompts you to remove
all the Ink Su
pplies.
5 Remove all the Ink Cartridges.