User's Manual

6. The tray conguration message displays on the

printer control panel.

7. If the paper size and type shown is not correct,

select Modify to choose a dierent paper size or

type.

For custom-size paper, specify the X and Y

dimensions for the paper when the prompt

displays on the printer control panel.

Tray 2 and the 550-sheet trays paper orientation

When using paper that requires a specic orientation, load it according to the information in the following

table.

NOTE: The Alternative Letterhead Mode settings aects the way to load letterhead or preprinted paper. This

setting is disabled by default. When using this mode, load paper as for automatic duplex printing. For more

information, see Use alternative letterhead mode on page 25.

Paper type Image Orientation Single-sided printing Duplex printing or with

Alternative Letterhead Mode

enabled

Letterhead or preprinted Portrait Face-up

Top edge toward the right

Face-down

Top edge toward the left

24 Chapter 2 Paper trays ENWW