User's Manual

3. Spread the paper guides to the correct size, and
then load paper in the tray. For information about
how to orient the paper, see Tray 1 paper
orientation on page 20.
4. Make sure that the paper ts under the ll line on
the paper guides.
NOTE: The maximum stack height is 10 mm
(0.4 in), or approximately 100 sheets of 75g
paper.
5. Adjust the side guides so that they lightly touch
the paper stack, but do not bend it.
ENWW Load paper to Tray 1 (multipurpose tray) 19