User's Manual

NOTE: These settings are temporary. After you have nished the job, the printer returns to the default
settings.
Check the error-correction settings
The Error Correction Mode setting might be disabled, which can reduce image quality. Follow these steps to
re-enable the setting.
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
General Fax Send Settings
3. Select the Error Correction Mode option. Touch the Save button.
Check the t-to-page setting
If the Fit to Page setting is enabled, and the incoming fax is larger than the default page size, the printer
attempts to scale the image to t the page. If this setting is disabled, larger images split across multiple
pages.
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Fit to Page
3. Touch the Enabled option to enable the setting, or touch the Disabled option to disable it. Touch the Save
button.
Clean the pickup rollers and separation pad in the document feeder
Follow these steps if the document feeder does not pick up pages correctly or produces skewed output.
200 Chapter 9 Solve problems ENWW