User's Manual
3. Adjust the sliders to set the levels, and then touch the OK button.
4. Touch the Start button.
NOTE: These settings are temporary. After you have nished the job, the printer returns to the default
settings.
Optimize copy quality for text or pictures
Optimize the copy job for the type of image being copied: text, graphics, or photos.
1. From the Home screen on the printer control panel, select Copy.
2. Touch the More Options button, and then touch the Optimize Text/Picture button.
3. Select one of the predened options, or touch the Manually adjust button, and then adjust the slider in
the
Optimize For area. Touch the OK button.
4. Touch the Start button.
NOTE: These settings are temporary. After you have nished the job, the printer returns to the default
settings.
Edge-to-edge copying
Use this feature to avoid shadows that can appear along the edges of copies when the original document is
printed close t
o the edges.
1. From the Home screen on the printer control panel, scroll to and touch the
Administration button.
2. Open the fol
lowing menus:
●
Copy Settings
●
Edge-To-Edge
3. Select the
Edge-To-Edge output option if the original document is printed close to the paper edges.
4. Touch the Save button.
5. Touch the Start button.
Clean the pickup rollers and separation pad in the document feeder
Follow these steps if the document feeder does not pick up pages correctly or produces skewed output.
188 Chapter 9 Solve problems ENWW