User's Manual

2. Open the scanner lid.

3. Clean the scanner glass, the document feeder

trips, and the white plastic backing with a soft

cloth or sponge that has been moistened with

nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone,

benzene, ammonia, eth

yl alcohol, or carbon

tetrachloride on any part of the printer; these can

damage the printer. Do not place liquids directly

on the glass or platen. They might seep and

damage the printer.

NOTE: If you are having trouble with streaks on

copie

s when you are using the document feeder,

be sure to clean the small strip of glass on the left

side of the scanner.

4. Dry the glass and white plastic parts with a

amois or a cellulose sponge to prevent

spotting.

5. Connect the power cable to an outlet, and then

ess the power button to turn the printer on.

Calibrate the scanner

If the copied image is not positioned correctly on the page, follow these steps to calibrate the scanner.

NOTE: When using the document feeder, make sure to adjust the guides in the input tray so they are against

the original document.

1. From the Home screen on the printer control panel, scroll to and touch the

Device Maintenance button.

2. Open the following menus:

●

Calibration/Cleaning

●

Calibrate Scanner

186 Chapter 9 Solve problems ENWW