User's Manual

Energy-conservation settings
Introduction
●
Optimize speed or energy usage
●
Set the sleep timer and congure the printer to use 1 watt or less of power
●
Set the sleep schedule
Optimize speed or energy usage
By default the product stays warm between jobs to optimize speed and print the rst page of jobs faster. To
conserve energy, set the product to cool between jobs. The product has four incremental settings to optimize
for speed or energy usage.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Energy Settings
●
Optimum Speed/Energy Usage
3. Select the option that you want to use, and then touch the Save button.
NOTE: The default setting is Faster rst page.
Set the sleep timer and congure the printer to use 1 watt or less of power
The printer has several options for the energy-saving sleep timer feature. The time delay to enter the Sleep/
Auto O state is adjustable, and the power usage during the Sleep/Auto O state varies according to selection
for the wake option.
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Energy Settings
●
Sleep Timer Settings
3. Select Sleep /Auto O After, enter the appropriate time period, and then touch the Save button.
NOTE: In the European Union the Sleep/Auto O After or Sleep /Auto O After Inactivity option is
always enabled, and no checkbox is available to turn it o.
NOTE: The sleep-mode default time is 0 minutes. The printer enters sleep mode immediately after
each job completes.
4. Select one of the Wake/Auto On to These Events options.
ENWW Energy-conservation settings 133