User's Manual
Set up fax
Introduction
This information applies to fax and Flow models, or to other printers when an optional analog fax accessory
has been installed. Before continuing, connect the printer to a phone line (for analog fax) or to an Internet or
network fax service.
Set up fax by using the printer control panel
1. From the Home screen on the printer control panel, scroll to and touch Administration.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Fax Setup Wizard
NOTE: If the Fax Settings menu does not appear in the menu listing, LAN or Internet fax might be
enabled. When LAN or Internet fax is enabled, the analog fax accessory is disabled and the Fax Settings
menu does not display. Only one fax feature, either LAN fax, analog fax, or Internet fax, can be enabled
at a time. To use analog fax when LAN fax is enabled, use the HP Embedded Web Server to disable LAN
fax.
3. Follow the steps in the Fax Setup Wizard to congure the required settings.
108 Chapter 7 Fax ENWW