User's Manual
3. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it. For information about how to orient
the paper, see Trays 2, 3, 4, and 5 paper
orientation on page 24.
NOTE: To prevent jams, adjust the paper guides
to the correct size and do not overll the tray. Be
sure that the top of the stack is below the tray
full indicator.
4. Close the tray.
5. The tray conguration message displays on the
product control panel.
6. If the paper size and type shown is not correct,
select Modify to choose a dierent paper size or
type.
For custom-size paper, specify the X and Y
dimensions for the paper when the prompt
displays on the product control panel.
Y
X
ENWW Load Trays 2, 3, 4, and 5 23