User's Manual

●
Remove anything that is blocking the vents on the product. The product requires good air ow on all
sides, including the top.
●
Protect the product from airborne debris, dust, steam, grease, or other elements that can leave residue
inside the product.
Step three: Set the individual tray alignment
Follow these steps when text or images are not centered or aligned correctly on the printed page when
printing from specic trays.
1. Press the Home button on the product control panel.
2. Open the fol
lowing menus:
●
Administration
●
General Settings
●
Print Quality
●
Image Registration
3. Select the tray to adjust.
4. Select Print Test Page, and then follow the instructions on the printed pages.
5. Select Print Test Page again to verify the results, and then make further adjustments if necessary.
6. Touch the Save button or press the OK button to save the new settings.
Calibrate the product to align the colors
Calibration is a product function that optimizes print quality.
Follow these steps to resolve print print-quality problems such as misaligned color, colored shadows, blurry
graphics, or other print-quality issues.
1. Press the Home button on the product control panel.
2. Open the fol
lowing menus:
●
Device Maintenance
●
Calibration/Cleaning
●
Full Calibration
3. Select
Start to start the calibration process.
A Calibrating message will display on the product control panel. The calibration process takes a few
minutes to complete. Do not turn the product o until the calibration process has nished.
4. Wait while the product calibrates, and then try printing again.
Check other print job settings
When printing from a software program, follow these steps to try to resolve the issue by adjusting other
print-
driver settings.
ENWW Improve print quality 105