White Paper

Figure 13
12. Save the changes by pressing ESC twice, and then select Save Changes. This saves the
configuration changes to selected HBA.
13. From the Fast!UTIL Options menu, choose Select Host Adaptor option, and press Enter. Select
the other HBAs (Figure 6
) and repeat the steps 2 to 12 to configure the HBA for booting the
server.
Note: Refer to the “Booting Itanium Linux systems from a storage area network application notes”
for the procedure to configure the HBA ROM on an Itanium server. You can locate this guide in
the SPOCK website (http://www.hp.com/storage/spock
) under Boot Guide Application Notes.
You must sign up for a HP Passport to enable access.
9