White Paper

Figure 20

12. Select option 1, Boot this device via WWPN.

Figure 21

13. From the Saved device list menu (Figure17

), configure the alternate paths for boot devices by

selecting the unused entries and repeating steps 9 to 12.

14. From Emulex Adapters menu (Figure 14

), configure the other HBAs by repeating steps 2 to

13.

15. Exit from the BIOS menu and reboot the server.

Note: Refer to the “HP StorageWorks Booting Itanium Linux systems from a storage area network

application notes” for the procedure to configure the Emulex HBA ROM on Integrity server.