HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW24A-TE, January 2005)

Diagnostic and system error messages reference guide
87Fabric OS 3.x Document Addendum
DIAG-CMIDATA
Message
Probable Cause
The CMI data received did not match data transmitted. This usually indicates an ASIC or
motherboard failure. This message is generated by the cmitest command. The error
code value is for internal use only.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8 EL, replace the entire switch.
Severity
CRITICAL
DIAG-CMIINVCAP
Message
Probable Cause
The ASIC unintentionally got a CMI capture flag. This usually indicates an ASIC or
motherboard failure. This message is generated by the cmitest command. The error
code value is for internal use only.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8 EL, replace the entire switch.
Severity
CRITICAL
<timestamp>
CRITICAL DIAG-CMIDATA, 1, <test name>, pass <number>,
Pt<source port info>-Pt<destination port info>: RX Data is <actual value>
sb <expected value> er 0x<err value>,
Err# <error code>
<timestamp>
CRITICAL DIAG-CMIINVCAP, 1, <test name>, pass <number>,
Pt<source port info>-Pt<destination port info>: Pt<fail port> erroneously
got CMI Capture Flag (bit31 is 1),
Err# <error code>