HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW24A-TE, January 2005)

Advanced Web Tools user guide
52 Fabric OS 3.x Document Addendum
Removing a RADIUS Server
To remove a RADIUS server:
1. Access the Switch Admin Window (see “About the Switch Admin Module.”)
2. Enter the admin user name and password.
3. Select the AAA Service tab.
4. Select a RADIUS server from the RADIUS Configuration list.
5. Click Remove. If there is no RADIUS server configured, the Remove button is disabled.
You cannot remove the only RADIUS server if the RADIUS service is the primary AAA
service.
The RADIUS server is not deleted until you apply the changes from the AAA Services
tab.
6. Click the Apply button.
On original page 146, under the heading “Trunk Information Tab Example,” replace
original Figure 33, “Trunk Information Tab,” with the following:
Figure 22: Trunk Information Tab