HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW24A-TE, January 2005)

Advanced Web Tools user guide
32 Fabric OS 3.x Document Addendum
Delete the following row:
And replace it with these two rows:
On original page 111, under the heading “Using the SNMP Tab to Set Trap Levels,”
replace step 4 with the following:
6. For each recipient, select a Trap level from the pull-down menu. The level you select
refers to the Event level that prompts a trap. See “About the Switch Events Button.”
Permissions Displays the read/write access of a particular community string.
READ ONLY access means that a member of a community string has
the right to view, but cannot make changes. READ/WRITE access
means that a member of a community string can be both viewed and
make changes.
Access Control Displays the read/write access of a particular community string.
READ ONLY access means that a member of a community string has
the right to view, but cannot make changes. READ/WRITE access
means that a member of a community string can be both viewed and
make changes.
Trap Level Use to set the severity level of switch events that prompt SNMP traps.
Default is 0.