HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW24A-TE, January 2005)

Fabric OS procedures user guide
141Fabric OS 3.x Document Addendum
■ Test the configuration.
1. Log in to the server and change directory to the RADIUS configuration file directory.
Typically, this directory is located at /usr/local/etc/raddb.
2. Use a text editor to create a vendor dictionary file called dictionary.hp and enter the
following lines into the file:
3. Save dictionary.hp.
4. Open the dictionary file in a text editor and add this line:
5. Save the dictionary file.
6. Open the client.config file in a text editor and add the switches that are to be
configured as RADIUS clients. For example, to configure the switch at IP address
10.32.170.59 as a client:
In this example, the switch name is Testing Switch and its shared secret is Secret.
Make sure that the shared secret matches that configured on the switch (see “Adding a
RADIUS Server”).
7. Save client.config.
8. Open the user file in a text editor and add user names and roles for users who will be
accessing the switch. For example, to set up an account called JohnDoe with the admin
role:
9. Save the user file.
10. Enter the following command to start the RADIUS server:
/usr/local/sbin/radiusd
11. Log in to a client switch and issue the aaaconfig command to configure it as a client
and enable RADIUS service, as described in “Adding a RADIUS Server” and “Enabling
and Disabling RADIUS Service.”
12. Log out.
When you log in to the switch again, RADIUS service is in force.
#
# dictionary.hp
#
VENDOR HP 1588
#
# attributes
#
ATTRIBUTE HP-Auth-Role 1 string HP
$INCLUDE dictionary.hp
client 10.32.170.59
secret = Secret
shortname = Testing Switch
nastype = other
JohnDoe Auth-Type := Local, User-Password == “johnPassword”
HP-Auth-Role = “admin”