HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 231
4. Click Check
The Merge Check Results displays a list of any inconsistencies between the two fabrics (see
Figure 162).
Figure 162 Merge check results
NOTE: If you run a fabric merge check between a secure fabric and a non-secure fabric, the results of the
Security, FCS policies, version stamp, and Management Server platform tests display the message Not
applicable to subject fabrics.
If the two zoning databases on the fabrics prevent the fabrics from merging, you are queried about
launching the Zone Merge Manager tool.
5. Optional: Launch the Zone Merge Manager tool.
It highlights all of the zoning conflicts between the two fabrics in red. With this information, you can
resolve the conflicts and apply the results to either of the fabrics.
The Merge Check Results is again displayed (see Figure 162). At the zoning test stage, it reports,
Merge Check Successful, along with the results of the other tests.
If you decided not to use the Zone Merge Manager tool, the zoning test reports Operator
cancelled zone merge - Merge Check Failed for the zoning test, along with the results of all
the other tests in the Merge Check Results window.
Setting the log level
NOTE: Use this feature for capturing diagnostic information.
You can set the log parameters to capture diagnostic information only at the severity levels you want.
Configuring the severity levels determines which errors you want Fabric Manager to save to the log file.
Any changes you make to the log level are immediate (they do not require an application restart).
To configure log parameters:
1. Select Configuration > FM Options.
The Options window opens.
2. Expand User Specific and click Log Parameters.
The Log Parameters dialog box opens (see Figure 163).