HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

228 Fabric troubleshooting tools
4. Select two devices to troubleshoot.
To select devices from the Available Devices list:
a. Expand the tree in the Available Devices list.
b. Select the device and click the right arrow button to add it to the Selected Device list.
To search for devices:
a. Enter the device port WWN or device port name in the Device Port WWN/Device Port Name field.
You must enter the full device port WWN or device port name. Wildcards are not supported.
b. Select an option from the Look In drop-down menu.
c. Click Search and Add.
The Device Search Results window opens.
d. Select up to two devices and click Add Selected Devices.
5. Click Next.
The Analysis window opens (see Figure 159).
Figure 159 Device analysis window
6. Click Begin Analysis.
A progress bar shows the status of the analysis; the diagnostic check currently being performed is
displayed.