HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

212 Working with Fibre Channel routers
8. Click Next.
A summary shows the ports and routers that you have configured to be edge fabrics (see Figure 144).
Figure 144 Summary of FC Router configuration
9. If everything in the summary is correct, click Finish.
A confirmation is displayed, stating that the FC Router configuration might take a few minutes to
complete.
10.Click Yes to complete the configuration process.
An information message informs you that the configuration completed successfully, and that you should
physically connect the selected edge fabrics to the FC Router (FCR) switches.
11.Click OK.
12.Click Close from the Summary screen to exit.
Displaying logical SANs
The Fabric Manager LSAN view is available only when an edge fabric is selected from the SAN Elements
tab. An additional view (LSAN Info) is available only when you select an FC router from the SAN Elements
tab.