HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

196 Managing secure fabrics
Figure 128 Merge confirmation
6. Click Yes if these are the two fabrics you want to merge and the main fabric is properly identified.
A merge fabric compatibility check is performed and you can receive the following results:
• Compatible parameters: The Select FCS Switches window opens (see Figure 129).
• Noncompatible parameters: A failure notice is displayed (see Figure 130). Click OK and then exit
the Merge Secure Fabrics wizard and fix the incompatibility using the CLI. After fixing the
incompatibility, run the Merge Secure Fabrics wizard again. See the HP StorageWorks Fabric OS
5.x command reference guide for information about CLI commands.
Figure 129 Select FCS switches