HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

192 Managing secure fabrics
7. Click Save to save your changes but not apply them, or click Activate to save and apply your changes.
The Security Policy Review dialog box opens.
8. After reviewing the Security Policy, click one of the following:
• Continue to continue applying your changes
• Cancel to cancel your changes
• Copy to File to copy the Security Policy to a file
To make changes to your Serial or Front Panel policy:
1. From the SAN Elements tab, right-click the primary FCS switch of the secure fabric that you want to set
policies on and select Security > Security Policy Editor from the context menu.
The Policy Editor opens (see Figure 116 on page 183).
2. Select the tab that corresponds to the policy you want (Serial or Front Panel).
The policy you selected is displayed (see Figure 122 on page 191; the Serial policy in this example).
3. Perform either of the following:
• To add a switch to the policy, select the switch in the Available Access Points list and then click Add
Switch. (Click Save to save your changes but not apply them, or click Activate to save and apply
your changes.)
• To remove a host from the policy, click the host in the Permitted Access Points field and then click
Remove Switch. (Click Save to save your changes but not apply them, or click Activate to save and
apply your changes.)
Changing the admin security password
To change the password that implements security:
1. From the SAN Elements tab, right-click the primary FCS switch of the secure fabric for which you want to
change the password and select Security > Security Policy Editor from the context menu.
The Policy Editor opens (see Figure 116 on page 183).
2. Select the Password tab (see Figure 123).
Figure 123 Configuring the FCS or non-FCS admin security password
3. Enter the current password in the FCS Administrator Password field.
4. Enter the new password in the New Password field.
Passwords must contain 8 to 40 characters and must differ from the old password by at least one
character.