HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

190 Managing secure fabrics
Figure 121 Configuring the SES policy
3. Click Create Policy.
The WWN of a device that connects to the fabric displays in the Available Access Points list.
4. Select a device from the Available Access Points list.
5. Click Add Device.
6. To save your changes or activate the policy with the changes, select the Summary tab.
7. Click Save to save your changes but not apply them, or click Activate to save and apply your changes.
The Security Policy Review dialog box opens.
8. After reviewing the Security Policy, click one of the following:
• Continue to continue applying your changes
• Cancel to cancel your changes
• Copy to File to copy the Security Policy to a file
To make changes to your SES or MS policy:
1. From the SAN Elements tab, right-click the primary FCS switch of the secure fabric that you want to set
policies on and select Security > Security Policy Editor from the context menu.
The Policy Editor opens (see Figure 116 on page 183).
2. Select the tab that corresponds to the policy you want (SES or MS).
The policy you selected is displayed (see Figure 121).
3. Perform any of the following:
• To add a device to the policy, click the device in the Available Access Points field and then click Add
Device. (Click Save to save your changes but not apply them, or click Activate to save and apply
your changes.)
• To remove a device from the policy, click the device in the Permitted Access Points field and then
click Remove Device. (Click Save to save your changes but not apply them, or click Activate to save
and apply your changes.)