HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

188 Managing secure fabrics
6. Click Add IP. The IP address is placed in the Permitted Access Points list.
To remove a switch from the policy, click the IP address from the Permitted Access Points list and then
click Remove IP.
To delete the policy, click Delete Policy.
7. To save your changes or activate the policy with the changes, select the Summary tab.
8. Click Save to save your changes but not apply them, or click Activate to save and apply your changes.
The Security Policy Review dialog box opens.
9. After reviewing the Security Policy, click one of the following:
• Continue to continue applying your changes
• Cancel to cancel your changes
• Copy to File to copy the Security Policy to a file
Configuring DCC policy options
You can configure DCC policies to bind device ports to specific switch ports. With Fabric Manager, you
can create and configure multiple DCC policies with unique names and populate DCC policies with switch
and device WWNs.
To create a DCC policy:
1. From the SAN Elements tab, right-click a the primary FCS switch of the secure fabric that you want to set
policies on and select Security > Security Policy Editor from the context menu.
The Policy Editor opens (see Figure 116 on page 183).
2. Select the DCC tab (see Figure 120).
Figure 120 Configuring the DCC policy