HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 183
Figure 116 Policy editor (summary tab view)
Table 21 Description of summary tab components
Object Description
Summary tab Displays both the defined and active security policies.
FCS tab Displays each switch that serves as a Fabric Configuration Server (FCS); adds or
removes switches from the list. See ”Configuring FCS policy options” on page 184
for additional information.
SCC tab Creates an SCC policy. See ”Configuring SCC policy options” on page 185 for
additional information.
TELNET tab Allows the host to access the fabric using the telnet protocol. See ”Configuring
telnet, RSNMP, WSNMP, HTTP, and API policy options” on page 186 for additional
information.
RSNMP tab Grants access for individual switches to run RSNMP (read-only SNMP) in a secure
fabric. See ”Configuring telnet, RSNMP, WSNMP, HTTP, and API policy options” on
page 186 for additional information.
WSNMP tab Grants access for individual switches to run WSNMP (read/write SNMP) in a secure
fabric. See ”Configuring telnet, RSNMP, WSNMP, HTTP, and API policy options” on
page 186 for additional information.
HTTP tab Provides HTTP access for a host into the fabric. See ”Configuring telnet, RSNMP,
WSNMP, HTTP, and API policy options” on page 186 for additional information.
API tab Provides fabric access for hosts using the HP API. See ”Configuring telnet, RSNMP,
WSNMP, HTTP, and API policy options” on page 186 for additional information.
DCC tab Creates a security policy that binds device ports to switch ports. See ”Configuring
DCC policy options” on page 188 for additional information.
SES tab Grants access for individual switches to run SES in a secure fabric. See ”Configuring
SES and MS policy options” on page 189 for additional information.
MS tab Grants access for individual switches to run Management Server in a secure fabric.
See ”Configuring SES and MS policy options” on page 189 for additional
information.