HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

174 Managing secure fabrics
Figure 105 Enable secure mode for fabric wizard
3. Click Next.
A list of all the available switches and FCS switches is displayed (see Figure 106).
Figure 106 Select FCS switches
4. Select the switches you want to be FCS switches from the Available Switches list.
If the switches you want to select remain undiscovered, enter the switch WWN in the Enter WWN field
under the FCS Switches list and then click OK. The switch is then added to the FCS Switches list.
5. Click the right arrow to move the switches you want in your secure fabric from the Available Switches
list to the FCS Switches list.
The FCS Switches list is populated with the switches you selected. The first switch listed in the FCS
Switches list is the Primary FCS switch.
6. Optional: Arrange the FCS Switches list order by using the up and down arrow buttons.
7. When the FCS Switches list is arranged in the order you want, click Next.
The Create Passwords for Secure Fabric window opens (see Figure 107).