HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

166 Managing zones
Managing zoning with Advanced Web Tools
You can monitor and manage zoning through the Zone Admin module. The information in the Zone Admin
module is collected from the selected switch.
NOTE: If secure mode is enabled, zoning can be administered only from the primary FCS switch. For
specific information regarding secure fabrics, see the HP StorageWorks Fabric OS 5.x Secure Fabric
administrator guide.
This section provides information about the Zone Admin module in Advanced Web Tools (see Figure 102).
It includes information about accessing the module, refreshing fabric and module information, saving any
zoning changes, and closing the Zone Admin module, and it describes the different zoning views
provided.
Consult the following sections for specific information about the Zone Admin module:
• Launching the zone admin module, next
• Managing zoning, page 167
Figure 102 Zone admin module
In the Zone Admin module, all WWNs also display vendor names. In the member selection lists in the
Zone Admin module that display fabric and device information, you can right-click port and device nodes
to display which aliases the port or device is a member of. In addition, you can right-click the device nodes
and click View Device Detail to display the Device Detail view, which launches a window displaying
detailed information about the selected device (see Figure 103).