HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 161
Figure 98 Create or change reboot groups and sequence
2. Select a fabric from the Select Fabric menu.
3. Click Create.
The Create Reboot Group dialog box opens (Figure 99).
Figure 99 Create reboot group
4. In the Name of the Reboot Group field, enter a name for the reboot group.
5. In the Fabric Stabilization Timeout field, specify the amount of time for the fabric to stabilize.
6. Optional: In the What to do if timeout occurs? field, select one of the following buttons (the default is
Prompt):
• Prompt: Provides a prompt whenever a timeout occurs that asks whether you want to continue.
• Continue: Continues the reboot sequence when a timeout occurs.
• Abort: Terminates the reboot sequence when a timeout occurs.
7. In the Delay After Fabric Stabilization field, enter the amount of time that must elapse before the next
reboot in the sequence begins.
Fabric Manager considers a fabric stable when all WWNs appear in the fabricShow command
output.
8. Click OK.
Your reboot group is displayed in the Reboot Groups tree.
The reboot groups listed in the Reboot Groups tree include bracketed text displayed next to the name of
the reboot group. The bracketed text represents the duration of the fabric stabilization timeout, the
timeout option selected in step 6, and the duration of the delay after fabric stabilization time that you
configured. For example:
In this example, 1m indicates a stabilization timeout of one minute, P identifies the timeout option
selected step 6, and 2m indicates that two minutes elapse before the next reboot in the sequence
begins.
[1m,P,2m]