HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

136 Switch configuration and management
Figure 76 Save baseline (parameter selection)
7. Click the check boxes for each setting or group of settings of the configuration file that you want to save
to the baseline. Expand and collapse the navigation tree to access your options.
NOTE: The Solaris environment does not display check boxes clearly. If the check box displays full, the
value is selected. If the check box displays shallow, it is not selected.
8. Click Save.
The Save base file dialog box opens.
9. Enter a name for your baseline, choose a folder to keep it in, and then click Save.
Comparing switches to a baseline file
This section provides information about comparing switches to a baseline file. When you compare the
configuration of a switch to a baseline file, Fabric Manager identifies and lists each parameter that does
not match. Compare the configuration of one or more switches to a baseline if you plan to merge two
fabrics, add a new switch to a fabric, verify that Fabric Watch and SNMP settings are consistent across a
fabric, or if a fabric segments and you want to troubleshoot the problem.
To compare switches to a baseline file:
1. Select Tools > Configuration > Compare/Download from File.
The Compare/Download from File -- Select Baseline Configuration dialog box opens (see Figure 77).