HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

Fabric Manager 5.x administrator guide 135
3. Select Tools > Configuration > Save Baseline.
The Save Baseline -- Configuration Template Selection dialog box opens (see Figure 74).
Figure 74 Save baseline (configuration template selection)
4. Select Full Configuration and then click Next.
The Save Baseline -- Switch Selection window opens (see Figure 75).
Figure 75 Save baseline (switch selection)
5. From the SAN Elements tab, choose the switch that has the configuration you want to save and then use
the right arrow to add it to the right-hand window.
6. Click OK.
The Save Baseline -- Parameter Selection window opens (see Figure 76).