Setup guide

Lustre Workstation Features
The following table describes the features available to each Lustre workstation.
NOTE The features of Lustre 2011 may vary based on your hardware platform.
Consult the Autodesk 2011 Release Notes for your release for specific system
information.
ConfigurationStation
Default All features are available including SD and HD I/O, dual
link and HSDL video formats and the DI Pack, which consists of in-
Master Station
frared channel dust removal and support for all standard input and
output resolutions and bit-depths. Certain features require add-on
licensing.
Add-Ons The following features can be added to the Default con-
figuration: the Slave Renderer and up to three panels for the Autodesk
control surface. The Slave Renderer requires a separate license.
Default Includes all features except for the DI Pack (see the Master
Station description). File input is limited to 2K resolution. File output
Lustre HD Sta-
tion
is limited to HD resolution, 10-bit. Certain features require add-on li-
censing.
Add-Ons The following features can be added to the Default con-
figuration: SD and HD I/O, dual link and HSDL video formats, the
Slave Renderer, and up to three panels for the Autodesk control sur-
face. The Slave Renderer requires a separate license.
Default All features are available except for primary and secondary
colour grading. The DI Pack (see the Master Station description) is
Lustre Station
also included, along with full dust removal functionality, and the
ability to create geometries and masks.
With Primary Colour Correction Includes all features of the default
option as well as primary colour grading.
Add-Ons The following features are available for either the Default
configuration or the With Primary Colour Correction configuration,
and require an additional license: SD and HD I/O, dual link and HSDL
video formats, and up to three panels for the Autodesk control surface.
The Slave Renderer requires a separate license.
Lustre Workstation Features | 3