Setup guide

2 Use a network cable to connect port 0 (the far right port) of the Broadcom
network card on your workstation to port 1 on the Netgear ProSafe FS108
network switch.
1 3 4 5 6 7 8
PWR
NETGEAR
2
Autodesk Control Surface
5V DC 4A Ethernet
Autodesk
Tablet
S
ystem
Power
Link
Activit y
-
+
Network Switch
To USB extender
Ports 3 and 4 to
additional panels
To port 1 on USB Extender
HP xw8600 Workstation
If you are using only one panel, you can connect that panel directly to
the workstation, instead of using the switch.
Connecting the Autodesk Control Surface | 33